1" Stop & Drain- Freeze Tolerant ball valve. Part# FTBV-10-D
1 inch Freeze Tolerant Ball Valve (FTBV) with Stop and Drain Feature.
Replace the PLUG not the valve.
Features for All FTBV’s: Replaceable Freeze Plug - Pre-installed, Full Port, Chrome Plated Brass Ball, Teflon Seat, Stainless Steel Stem, Stainless Steel Nut, Wider Handle, Brass Body with Substantially Thicker Side Walls, 600 WOG Rated.
Freeze Plug will burst during temperatures below 32 degrees F or 0 degrees C; if the valve has water inside and the valve has been shut OFF; and/or If there is not water in the valve but it has not been turned to a 45-degree angle. Plug is easily replaced without having to remove the valve.
Additional freeze plugs sold separately.
All FTBV’s have a Limited Lifetime Warranty not to crack the side of the valve within the Teflon Seals.
FREE SHIPPING on orders over $75. USA Only.
Extra protection against freeze damage.
Valve orientation: When Handle is in line with the valve, the valve is Open. When Handle is perpendicular to valve, Valve is Closed. Move handle Handle Clockwise to turn valve OFF, and valve drain the ball cavity and downstream piping.